NEWS:
SHANDONG ALINDA SCI-TECH DEVELOPMENT CO.,LTD.
Contact: Mr. Wang
Phone: 13606437026
Sales: 0533-7662849
E-mail: lzaldhg@sina.com
2016-7-20 9:33:42 Traffic:
Talc (14807-96-6) specifications:
Grade plastics, rubber grade, cosmetic grade, pharmaceutical - food grade talc product quality should meet the following national standard GB 15342-94:
1. Plastic Talc technical requirements
Premium grade First grade Qualified
Whiteness /% ≥ 90.0 85.0 80.0
Fineness (45μm through rate) /% ≥ 99.0 98.0 95.0
Cumulative particle size distribution content
<20μm /% ≥ 80.0 72.0 60.0
<10μm /% ≥ 50.0 36.0 26.0
<5μm /% ≥ 30.0 16.0 12.0
Silica /% ≥ 61.0 58.0 55.0
MgO /% ≥ 31.0 29.0 27.0
Ferric oxide /% ≤ 0.50 1.00 1.50
Aluminum oxide /% ≤ 1.00 2.00 3.00
Calcium oxide /% ≤ 0.50 1.50 4.50
Loss on ignition (1000 ℃) /% ≤ 6.00 8.00 9.00
Bulk density
Bulk density / (g / cm3) ≤ 0.45 0.55 0.65
Tightness / (g / cm3) ≤ 0.90 0.95 1.00
Moisture /% ≤ 0.50 0.50 1.00
2. Talc rubber technical requirements
Premium grade First grade Qualified
Moisture /% ≤ 0.5 0.7 1.0
Fineness (75μm through rate) /% ≥ 99.9 99.5 99.0
Loss on ignition (1000 ℃) /% ≤ 7.00 9.00 24.00
pH of 8.0 to 10.0 8.0 to 10.0 8.0 to 10.0
In Acid /% ≤ 6.0 15.0 20.0
Acid-soluble iron (Fe2O3 to count) /% ≤ 1.00 2.00 3.00
Soluble copper /% ≤ 0.005 0.005 0.005
Soluble Mn /% ≤ 0.05 0.05 0.05
3. Cosmetic grade talc technical requirements
Premium grade First grade Qualified
Whiteness /% ≥ 90.0 85.0 80.0
Moisture /% ≤ 0.5 0.7 1.0
That was when iron salts are not blue
Water soluble matter /% ≤ 0.1 0.1 0.1
In Acid /% ≤ 1.5 2.0 4.0
Degree of fineness
75μm by rate /% ≥ 98.0 98.0 98.0
45μm by rate /% ≥ 98.0 98.0 98.0
Loss on ignition (1000 ℃) /% ≤ 5.50 6.50 7.00
Arsenic /% ≤ 3 × 10-4 3 × 10-4 3 × 10-4
Lead /% ≤ 20 × 10-4 20 × 10-4 20 × 10-4
Bacteria / (a / g) Total 500; mold 100; not detected pathogens ①
Amphibole asbestos minerals ≤ X-ray diffraction analysis can not be found
① mainly refers to bacteria Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa.
4. Pharmaceutical, food-grade talc technical requirements
Premium grade First grade Qualified
Characters odorless, tasteless, no sand particles, lubrication sense
Whiteness /% ≥ 90.0 85.0 80.0
Moisture /% ≤ 0.5 0.7 1.0
Bacteria / (a / g) Total 500; mold 100; not detected pathogens ①
Loss on ignition (1000 ℃) /% ≤ 6.00 6.50 6.50
Water soluble matter /% ≤ 0.1 0.1 0.1
PH neutral reaction litmus paper
In Acid /% ≤ 1.5 1.5 1.5
That was when iron salts are not blue
Degree of fineness
75μm by rate /% ≥ 98.0 98.0 98.0
45μm by rate /% ≥ 98.0 98.0 98.0
Arsenic /% ≤ 3 × 10-4 3 × 10-4 3 × 10-4
Lead /% ≤ 10 × 10-4 10 × 10-4 10 × 10-4
Heavy Metal /% ≤ 40 × 10-4 40 × 10-4 40 × 10-4
① mainly refers to bacteria Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa.
Cosmetics and industrial steatite talc product quality should meet the following national standard GB 15341-94
5. Cosmetics steatite technical requirements
Premium grade First grade Qualified
Whiteness /% ≥ 90.0 85.0 80.0
Silica /% ≥ 61.0 59.0 58.0
MgO /% ≥ 31.0 30.0 29.0
Ferric oxide /% ≤ 0.50 1.00 1.30
Aluminum oxide /% ≤ 1.00 1.50 2.00
Calcium oxide /% ≤ 0.50 1.50 1.50
Loss on ignition (1000 ℃) /% ≤ 5.50 6.00 6.50
Water soluble matter /% ≤ 0.1 0.1 0.1
In Acid
Cosmetics block /% ≤ 1.5 2.0 4.0
Medicine - food block /% ≤ 1.5 1.5 1.5
That was when iron salts are not blue
Arsenic /% ≤ 3 × 10-4 3 × 10-4 3 × 10-4
Lead /% ≤ 10 × 10-4 10 × 10-4 10 × 10-4
Amphibole asbestos minerals X-ray diffraction analysis can not be found
6. Industrial talc technical requirements
Chunk and block the small talc talc
Premium grade First grade Qualified No. 1 on the 23rd
Whiteness /% ≥ 90.0 85.0 80.0 80.0 75.0 60.0
Silica /% ≥ 61.0 58.0 53.0 54.0 48.0 35.0
MgO /% ≥ 31.0 29.0 27.0 29.0 27.0 25.0
Ferric oxide /% ≤ 0.50 1.00 1.50 1.50 2.50 -
Aluminum oxide /% ≤ 1.00 1.50 2.00 2.00 3.00 -
Calcium oxide /% ≤ 0.50 1.20 2.50 2.50 5.00 -
Loss on ignition (1000 ℃) /% ≤ 6.00 8.00 12.00 - - -
Alinda Zibo Chemical Co., Ltd. has erucic acid amide, oleic acid amide, hydrous magnesium silicate, hydrous magnesium silicate compound, anti-blocking agent opening couplet, polypropylene nucleating agents, functional additives for polypropylene, with pre-full-density mixture, rotational light stabilizers, PPA complex series of chemical additives masterbatch products, as well as a high-quality, professional services team, excellent products, perfect service and preferential prices, welcomed throughout the country a friend calls to negotiate with us! !
24 hours service hotline